火焰探测器-KLC系列 KLC10/230 紧凑的设计晶体管输出可以快速更换*对日光不敏感

火焰探测器-KLC系列 KLC10/230

Are compact UV-flame detector for heating and single burner applicati-ons, suitable for gas-, oil- and dual fuel burners. The flame detectors has been developed to meet the requirements of EN 298:2012 for burner management control units which make a ‘no-flame’ check after normal burner shut down when the flame amplifier is permanently energized. This Flame detector must be disconnected for started up once in a day.

是用于加热和单燃烧器应用的紧凑型紫外线火焰探测器，适用于燃气、燃油和双燃料燃烧器。火焰探测器的开发是为了满足EN 298 ：2012对燃烧器管理控制单元的要求，当火焰放大器永久通电时，在正常燃烧器关闭后进行“无火焰”检查。该火焰探测器必须断开连接，以便每天启动一次。

UV-flame detector specially designed for single burner firing systems that produ-ce almost no radiation in the visible light spectrum or operate with very low flame modulation.

The flame signal intensity can be easily recognised via an LED as a visual indicator. The KLC 1x can be connected directly to the ionisation or LDR input of the automatic burner control system. It is compatible in its dimensions, connection dimensions and pin assignment with other devices from the KLC series. All accessories are therefore identical and reduce the variety of parts in production and service.

紫外线火焰探测器专为单燃烧器燃烧系统设计，在可见光光谱中几乎不产生辐射或以非常低 的火焰调制运行。

火焰信号强度可以通过LED作为视觉指示器轻松识别。KLC 1x可以直接连接到自动燃烧器控制系统的电离或LDR输入。它的尺寸、连接尺寸和引脚分配与KLC系列的其他器件兼容。因此，所有附件都是相同的，减少了生产和服务中零件的多样性。